You surfer! Get your ideal surfboard. Enjoy each wave as it breaks. after surfing, what do you do? Have a shower and a drink.
Then wash your surfboard as well. Why damage your cherished surfboards when, with a little tender loving care, they may have long and happy lives?
Now, you might be thinking- How to clean a surfboard?
Your board doesn’t need to be cleaned with detergent, but you should rinse it in fresh water after each surf.
Saltwater is a caustic liquid. If you leave salt on your board, it will eat away at the resin and ruin it.
It’s there is a lot more to look for. For that, we’ve explained a whole article to you. Keep on reading and learn everything about it.
Surfboard Cleaning Procedures and Guidance
Cleaning a surfboard is critical if you want to maintain it in good shape and extend its life. But improper cleaning will do significant harm.
Overwaxing, for example, adds weight to your board and reduces grip. Also before cleaning it you’ll need to gather some ingredients. Let’s see the ingredient lists and procedure to clean it.
Materials
While cleaning your surfboard, there are a few things you need to streamline the process for you and enhance the board’s finish. The following are the tools required:
- A rag for wiping things down
- A wax comb has a serrated edge on one side and a smooth and flat edge on the other.
- Surfboard cleaning spray
- Coconut oil adds added conditioning and protection.
- Towel to dry everything off once you’re done.
Here I am adding a table recommending some good product suggestions. I know surfboards are expensive but the cleaning materials are not that much
| Ingredients | Products |
| A wax comb | Pickle Wax The Remover w/Wax Comb |
| Cleaning Spray | SOLAREZ Wax Remover & Cleaner |
| Coconut oil | Coco Road Organic Coconut Oil |
Now let’s move on to the main procedure.
1. Maintain And Polish
Here we are shortly describing the ways to maintain and polish a surfboard
- Add a few drops of dish soap to a bucket after filling it with water.
- If you work to sand the entire board, you will need 320 grit sandpaper.
- Sand the board with fine grit.
- Once it has dried, polish the board with the abrasive. And heat after dampening the compound
- With a paintbrush, surfboard polish may be applied in up to seven dabs.
2. Clean the Dirty Wax off your Surfboard
It’s time to learn the process of cleaning dirty wax and the whole board.
Step1: Place the Surfboard in the Sun
Start by setting up your board in full sunshine. The wax will soften as a result. Use a hairdryer on a somber or rainy day.
Step 2:Wax comb to Make Diagonal Cuts
Make diagonal slices through the wax in both directions using the wax comb’s serrated edge next. When you’ve sliced through enough wax, flip the comb over and scrape it away with the sharp, straight edge. Depending on how many coats were put on, this may need several attempts to thoroughly remove the wax.
Step 3: Warm Water on the Surfboard
Get some warm water and pour it over your board if it still has any very light, spotty wax on it. This should soften it enough to remove with a warm, damp cloth..
Step 4:Cleaning spray for surfboards
Checks for residual wax. However, for leftover undetectable quantities, use surfboard cleaning spray.
Step 5:Clean the surfboard with coconut oil
Cleaning the surfboard completely is the last step. Coat with coconut oil if desired to increase coat conditioning and luster. Your board is prepared for a new coat of wax or finishing spray after fully drying.
Another relevant article for you – How long will it take to learn surfing.
How Often Should You Clean Your Surfboard?
At the very least, your board should be completely cleaned after each session. Obviously, the amount of time you spend in the water and the location of your surfing make a difference.
Every time you surf, you should top up your board. Rinse quickly to avoid scaling and degradation.
Your board should be cleaned and re-waxed every 2-3 months, or 4-6 times a year, depending on the temperature of the water where you surf.
Waxing your surfboard improves its traction. This grip provides your body with the necessary friction.
Precautions to Be Taken
By following these tips, you’ll be able to enjoy your cleaning investment for many years to come.
- Remove your surf wax the right way
- Get your board repaired before waxing and get it fixed by a professional shop
- Remove the fins and keep your board on a soft and firm surface to avoid snapping while removing the wax.
- Never use a metal object to clean your surfboard since it could damage the board in addition to damaging the paint job.
- Before applying a solvent to remove wax, ensure sure the board is compatible with it.
- Make sure to finish all the cleaning outside your home because it could adhere to your clothing and furnishings and be difficult to remove.
- Consistently abide by the wax’s label’s directions.
- Spread the wax comb out evenly on the boar
- Apply the removal agent with a cloth or sponge rather than a tea towel as the latter leaves markings on the board’s surface. Circularly apply it until the board sparkles again
- Do not leave it in direct sunlight for more than five minutes
- Never clean your surfboard with a metal item since it will harm the board as well as the paint job.
How to clean a Surfboard?
Final words
Now that you know how to clean a surfboard, maintaining one will be a breeze, and you’ll be at the beach in no time!
For your surfboard, pick the appropriate cleaning kit. Make sure it’s eco-friendly. Happy Surfing.